Factors to Consider When Choosing Between Water Jet and Laser Cutters
For an individual who want to cut some materials there are only two methods they can use either water jet or laser. It is important to note that both water jet and laser cutters have their advantages and drawbacks making it challenging for an individual to make a decision. For example, water cutters can cut a more extensive scope of metal, however they also contain a risk danger when compared to laser cutters. Therefore the main question that an individual should ask when they want to cut a piece of metal is what kind of cutting service will give the best result and lower degree of health risk? This article explains some of the important things to consider when choosing between water jets and laser cutters.
The primary consideration a person should make when selecting a cutting service to use is the type and width of the material you want to work on. Both water jet and laser cutters can cut through a scope of materials, including plastics, wood, and glass. But water jet can be used to cut through thicker material compared to laser cutters. For instance, water jets can be used to cut through materials that are two inches thick while the laser is used to cut materials that have a thickness of less than one inch.
The second consideration you need to make when choosing between water jet and laser cutters technologies is the level of accuracy needed. Laser cutters are more exact than water jet cutters. The minimum slit size of the laser cutter is smaller than that of a water jet cutter. Hence, laser cutters have a low processing tolerance of 0.002″ compared to 0.008 for water jet cutters.
The third factor to examine when choosing between water jet and laser cutter is the damage on the material. When cutting material, you need to understand that both water jet cutting and laser cutting method has a risk of damaging the material you want to cut. It is important to note that water jet cutting method applies pressure on the material and in some cases, this can cause damage to the region being cut. In some instances the weight used can cause deformation of the material. On the other hand, laser cutters can leave burn marks on the material you are cutting. When cutting plywood or MDF materials be ready to see the burn marks once you have completed the cutting project. Regardless, the dull consumed parts can be washed in the vast majority of the cases.
In summary, the various tips discussed in this report are vital when selecting a cutting service method to use for your project.